Recent Job Openings at SPIE Oil & Gas Services

SPIE Oil & Gas Services (part of the SPIE Group) provides a complete range of services to some of the world’s largest oil and gas companies through its network of offices in 25 countries across Africa, the Middle-East and Asia-Pacific.

Our turnover has more than doubled in the last few years thanks to the dedication of our 4,000 employees to whom we give training, recognition, and genuine opportunities for career development. In order to support this growth, SPIE Oil & Gas Services is always seeking talented individuals to join its teams.

We are recruiting to fill the position below:

Job Title: Mechanical Technician – M/F

Reference: 2023-28885
Location: Nigeria (AKPO FPSO)
Contractual Hours: Full time
Contract Type: Fixed-term-contract
Contract Duration: Based on Client contract duration
Area Activity: Mechanical, HVAC and Electrical Services
Key Words: Maintenance / Mechanical / Technician / FPSO

Job Description
Mechanical Specific:

• Rolls Royce RB211 Gas Generators, Gas compressors, Hydraulic systems, Diesel Engines, Broad spectrum of pumps experience (all types), Air compression and General Utilities equipments.

Context and Missions:

• Rotation Status.
• Position Offshore on the FPSO

Main Activities

• Respect and apply QHSSE rules and procedures
• Be able to follow maintenance route and fill up associated check-up list (monitoring of rotating equipment). Be able to carry out lubrication routine and top up as required with the correct lubricant.
• Be able to prepare and install any type of flange gasket. Complete bolting following methodology.
• Be able to align V-belt, pulley and tension belts following methodology.
• For common types of valves be able to overhaul them and carry out minor adjustments while in service (tightening of gland packing).
• For gear box, be able to align gears, inspect & identify faults.
• For rotating equipment, be able to assist in diagnosis faults and failures, assist  in  alignment (prepare, cut shim material for alignment, level…). Be able to assist in the removal and replacement of any type of bearing. Check the clearance.

Profile
The holder of this post must have the following qualifications:

• Higher National Diploma or Certificate (HND / HNC (A-levels + 3 years study) or BTS / DUT or equivalent.
• 3 to 6 years experience in the field of maintenance on oil and gas production installations.
• A basic knowledge of the process of oil and gas treatment, installations and a thorough knowledge of the equipment used in oil and gas treatment installations

Candidate Criteria:
Minimum level of experience required:

• 3 years or more.

Required authorisations:

• BOSIET

Languages

• English (D-Full professional proficiency)

What Can We Offer You?

• We offer a variety of stimulating and evolving experiences: exciting projects, learning from professionals and immersed in international culture.

Application Closing Date
Not Specified.

Method of Application
Interested and qualified candidates should:
Click here to apply online

Job Title: Head of Maintenance Support – M/F

Reference: 2022-27121
Location: Nigeria
Contractual Hours: Full time
Contract Type: Permanent contract
Area Activity: Mechanical, HVAC and Electrical Services

General Description

• Management and co-ordination of onshore Preparation Team.
• Short and medium term improvement methods.
• Support of offshore operations.
• Participate to the definition of long term maintenance planning (it includes time schedule and resources definition).

HSE:

• Establishes and maintains a strong safety culture in line with Clients HSE Requirements and Rules.
• Ensures that Clients HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility.
• Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity.

Main Functions

• Validates short and medium term methods prepared by Contractor onshore team
• Co-ordinates planning and preparation activities.
• Set up and implement technical procedures, follow-up and update maintenance procedure in relation with Clients representatives.
• Analyses intervention reports.
• Ensures quality of the maintenance operations : preparation of intervention files, work orders, reporting, CMMS.
• In case of need, offshore assistance to the FPSO’s maintenance operations.
• Ensure repairs are properly managed.
• Participate to the stock review (quality and quantity).
• He supports the team on methods and preparation for short and medium term activities.
• Checks and ensures that vital equipment on production sites is available as and when required.

Profile
The holder of this post must have the following qualifications:

• Equivalent of DUT/BTS (French), B.Sc. Mechanical / Instrumentation/Electrical Engineering (2.1).
• 10 years of general industrial maintenance, with 5 years assignment in the oil/gas industry.
• Computer literacy is required.
• Ability to work offshore under the climatic conditions of the site.
• Ability to work in a multinational team.
• Ability to work in a service relationship.
• Competence/experience in the relevant specialties (mechanical/fitting, handling, tooling, electricity, instruments).
• Experience in CMMS (SAP/R3) and Stock Tool systems (skilled user level),
• Working language: English Bright 3.5 (or equivalent).
• He must have a proven sense of responsibility.
• He must be rigorous and methodical in his approach to operations.
• He must be able to anticipate and analyze.
• He must have proven ability as a leader of dedicated teams.
• Natural authority, founded on his abilities and on the trust he has in his teams, is essential.

Candidate Criteria:
Minimum level of experience required:

• 10 years or more.

Required Authorisations:

• SAS & HUET
• Valid Medical

Languages

• English (C-Professional working proficiency).

What Can We Offer You?

• We offer a variety of stimulating and evolving experiences: exciting projects, and learning from professionals and immersed in international culture.

Application Closing Date
Not Specified.

Method of Application
Interested and qualified candidates should:
Click here to apply online

Job Title: Head Electrical Engineer

Reference ID: 2023-28796
Location: Onshore dedicated for Exxon Mobil, Nigeria
Contract type: International Contract
Contractual hours: Full time

Job Description

• Support of offshore operations
• Facilitate maintenance activities of the SITE team through adequate preparation (spare parts verification etc…)
• Check repairs requirement and quality
• Short and medium-term improvement methods

HSE:

• Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules
• Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility,
• Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity

Main Functions (Applicable to all Specialties)

• Review preventive maintenance program validity. Check availability of means to complete it as and when required.
• Assist the SITE as required for corrective maintenance
• Prepare work pack for specific maintenance job when requested
• Analyse CMMS report for his field of competence and recommend improvement solutions to COMPANY as required
• Set up and implement technical procedures, follow-up and update maintenance procedure in relation with COMPANY representatives,
• Ensures quality of the maintenance operations : preparation of intervention files, work orders, reporting, CMMS,

Profile

• Equivalent of DUT/BTS (French), B.Sc. Degree in Mechanical / Instrumentation / Electrical Engineering (2.1),
• 5 years of general industrial maintenance
• Ability to work in a multinational team. Ability to work in a service relationship.
• Competence/experience in the relevant specialties (mechanical/fitting, handling, tooling, electricity, instruments),

Candidate criteria:

• Minimum level of experience required: 6 years or more

Required authorisations:

• BOSIET
• Computer literacy is required
• Experience in CMMS
• Physical ability to work on offshore installations in the climatic conditions of the site
• Working language: English Bright 3.5

Languages:

• English (D-Full professional proficiency).

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Head, Instrument Engineer

Reference: 2023-28795
Location: Nigeria (Exxon Mobil Nigeria) – Onshore
Contractual Hours: Full time
Contract Type: International contract

General Description

• Support of offshore operations,
• Facilitate maintenance activities of the SITE team through adequate preparation (spare parts verification, etc…)
• Check repairs requirement and quality.
• Short and medium term improvement methods.

HSE:

• Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules
• Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility,
• Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity.

Main Functions (Applicable to all Specialties)

• Review preventive maintenance program validity. Check availability of means to complete it as and when required.
• Assist the SITE as required for corrective maintenance
• Prepare work pack for specific maintenance job when requested
• Analyse CMMS report for his field of competence and recommend improvement solutions to COMPANY as required
• Set up and implement technical procedures, follow-up and update maintenance procedure in relation with COMPANY representatives,
• Ensures quality of the maintenance operations : preparation of intervention files, work orders, reporting, CMMS.

Profile

• Equivalent of DUT / BTS (French), B.Sc. Mechanical / Instrumentation / Electrical Engineering (2.1),
• 5 years of general industrial maintenance.
• Ability to work in a multinational team.
• Ability to work in a service relationship.
• Competence/experience in the relevant specialties (mechanical/fitting, handling, tooling, electricity, instruments).

Candidate Criteria:

• Minimum level of experience required: 6 years or more.

Required Authorisations:

• BOSIET
• Computer literacy is required
• Experience in CMMS
• Physical ability to work on offshore installations in the climatic conditions of the site
• Working language: English Bright 3.5.

Languages:

• English (D-Full professional proficiency).

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: CBM / Reliability Lead Engineer

Reference ID: 2023-28784
Location: Exxon Mobil, Nigeria
Contract type: International Contract
Contractual hours: Full time

Job Description
HSE:

• Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules
• Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility,
• Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity

Operations:

• Organises vibration, thermograph and oil sampling round. Analyse the results.
• Perform pump performances.
• Perform turbine and rotating compressor performances (training necessary)
• In charge of system 1 for monitoring and analyses.
• In charge of conditional maintenance vendors.
• Perform the scheduling of the conditional maintenance operations.
• Initiate and follow intervention using UNISUP.
• Assist Exxon Mobil for rotating equipment punctual diagnosis, and initial point after standard exchange,
• Takes part in daily, weekly and co-ordination meetings on site, when needed.

Methods:

• Keeps a critical eye on current preventive maintenance programmes and proposes improvements.
• Warns supports teams of recurring problems related to the availability or quality of spare parts.
• Keeps track of any backlog of work in his area of responsibility and suggests corrective measure if this backlog threatens becomes unmanageable.
• Prepare, adapt and modify Conditional Maintenance booklet,
• Edit monthly conditional maintenance report for the FPSO, including vibrations analysis, oil sampling results, pumps performances.
• Follow the organizations, proposals and material in the frame of new projects.

Quality assurance:

• Monitors the actions taken concerning analysis of vibration, lubricant analysis and performance monitoring until their correction.
• Is responsible for the implementation of the approved operating instructions and current industry practices when performing interventions under its control, thus ensuring the quality of maintenance.
• Monitors the status and quantity of available tools and, if necessary, request replacement or purchase.
• Offers improvements in procedures.

Profile

• Candidates should possess a Higher National Diploma or Certificate (HND / HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent,
• Proven experience on conditional base maintenance and vibration monitoring equipments.
• 3 to 5 years’ experience in the maintenance field on oil and gas production installations,

Candidate Criteria:

• Minimum level of experience required: 3 years or more

Required authorisations:

• BOSIET
• SAP/R3 experience and know-how
• Physical ability to work on offshore installations in the climatic conditions of the site
• Working language: English Bright 3.5

Languages:

• English (D-Full professional proficiency)

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Electrical Preparation Engineer M/F

Job ID: 2023-29329
Location: Nigeria
Contract type: Fixed-term-contract
Contractual hours: Full time
Contract duration: Based on AKPO Contract duration

Missions

• To prepare scopes of work and ensure that all materials and equipment are available as and when required for modifications, repairs or maintenance activities.
• Prepares scopes of work for approved work programmes ensuring that all relevant operating procedures and safety regulations are written in and that all necessary materials and equipment are available as and when required.
• Prepares with COMPANY review and Validation, various calls for bid to contractors invited to tender for work to be carried out.
• Supervises the execution of modification works at site, or as required by his hierarchy, especially for works executed by external contractors.
• He ensures that proper COMPANY procedures are followed, and that all modifications are properly documented.
• Assists with the analysis of equipment malfunctions and makes recommendations for repair and future preventive action.
• Proposes and justifies recommendations for the improvement of equipment availability and/or efficiency, and works with other entities in Production Methods to execute desired modifications.
• Assists with the preparation of the preventive maintenance schedule for plant and equipment and ensures that planned work takes place.
• Ensures that all work carried out takes account of and follows all relevant COMPANY procedures and practices with specific regard to those governing the health and safety of personnel.
• Receives information from Production Operations on plant/equipment histories and maintains up-to-date records for all individual pieces of equipment.
• Ensures that all Equipment and Spare parts documentation are updated.
  Carries out any other ad-hoc duties as may be assigned by the Head of Maintenance and Inspection dept from time-to time.
• Checks the quality in performance of the modifications made by means of commissioning, starting up and audits.
• Under direction of COMPANY, Follows and analyses on-site spare parts stock levels ensuring they are adequate and maintained, and that materials/equipment received accord with specifications.

Profile

• CMIMS – UNISUP R/3 or SAP similar package
• Computer literacy is mandatory,
• ATEX directive awareness
• Ability to work onshore and offshore under the climatic conditions of the site,
• Ability to work in a multinational team

Candidate criteria:

• Minimum level of experience required: 6 years or more

Required authorisations:

• 7/10 years” experience in the discipline area, preferably in the oil or petrochemical industries
• All Types of inverters, high voltage cells, variable speed units, HV/LV drive motors, Electrical Distribution Network, Lighting,
• Electrical Power Generation and distribution

Languages:

• English (D-Full professional proficiency)

What can we offer you?

• We offer a variety of stimulating and evolving experiences: exciting projects, learning from professionals and immersed in international culture

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Control Room Operator – M/F

Reference: 2023-28062
Location: Port Harcourt, Rivers
Contractual Hours: Full time
Contract Type: Permanent Contract
Area Activity: Technical Facilities Management

Mission
QHSE:

• Ensure HSE policy fulfillment during his activities.
• Establishe and maintains a strong safety culture in line with Company HSE Requirements and Rules.
• Be responsible to ensures compliance with HSE Legislation, Company Standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance, and responsible environment attitude
• Ensure compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity.
• Contribute to achieve and improve HSE targets.
• Perform the updating of technical documentation.
• Give his contribution in Hazard Analyses, incident investigations, Root Cause Failure Analyses, process incidents advising his hierarchy about HSE issues and proposing corrective solutions.

Main Activities

• Making sure that all equipment is working properly by running tests and diagnosing problems.
• Monitor equipment conditions using all indications available in the control room, on site, and portable test equipment.
• Inspect plant and equipment and prepare defect reports; ensure maintenance requests are completed to a satisfactory standard; assist in planning, organizing, and executing unit outages for inspections, overhauls, repairs, and cleaning.
• Read, interpret, and implement technical information found in manufacturer’s and OEM technical manuals, electrical and mechanical P & IDs, and operating and maintenance procedures.
• Participate in ongoing training to maintain and enhance the skills required to perform all Unit Operator and Equipment Operator duties and assist in the training of others.

Operations:

• Conduct shift change by fully briefing the incoming Unit Operator.
• Monitoring alarms to ensure that equipment is functioning properly.
• Recording data on computer systems or writing down information on paper charts.
• Controlling all plant operations and monitoring plant performance during emergencies to ensure they are functioning correctly.
• Quickly respond and take corrective action to plant alarms
• Maintaining records of daily operations, including maintenance schedules and equipment performance.
• Responding to alarms by contacting operators at other facilities or initiating emergency response procedures.
• Documenting events in a logbook or computerized system to track equipment status and record system performance.
• Responding to emergencies by operating equipment such as alarm systems, generators, pumps, and sprinkler systems.
• Monitoring real time data from equipment such as radiation levels or chemical concentrations to ensure that it does not exceed safe limits.
• Quickly respond and take corrective action to plant alarms.

Profile

• 6 years or more.
• Strong understanding of gas processes , equipment.
• Strong work ethic.
• Motivated, proactive and energetic.
• Experience in instrumentation.
• Experience in Gas turbine.
• Experience in Power Plant or Power distribution.
• Able to use a computer , understand DCS Foxborro.
• Able to liaise with client.
• Interact well with team.

Required Authorisations:

• Apave Low voltage Techncian Certified
• Valide Medical
• Job Safety Analysis (JSA).

Languages

• English (C-Professional working proficiency).

What Can We Offer You?

• We offer a variety of stimulating and evolving experiences: exciting projects, learning from professionals and immersed in international culture.

Application Closing Date
Not Specified.

Method of Application
Interested and qualified candidates should:
Click here to apply online

Job Title: Construction / FFSD Manager – M/F

Reference: 2023-28303
Location: Port Harcourt, Rivers or Lagos
Contractual hours: Full time
Contract type: International Contract
Area Activity: Mechanical, HVAC and Electrical Services

Job Description

• Thanks to its internationally recognized expertise in the field of oil and gas production unit operations and maintenance, SPIE Oil & Gas Services was selected to provide this activity on EHRA’s Full Field Shutdown in Nigeria.
• We are currently looking to further strengthen our skills in this field by integrating talents capable of blending into our teams and thus participating in our growth in Sub-Saharan Africa. Do you recognize yourself in this portrait? We would be delighted to consider your application.
• In this context, we are looking for competent and passionate professionals for a position of Construction/FFSD Manager M/F.
• This position is located Onshore & Offshore with 11*2 Rotation Mode.

Profile
The following knowledge will be essential for success in this position:

• Chartered Engineer (A-levels + 5 years’ study) or Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent.
• 10 years experience in the construction field on oil and gas production installations.
• A basic knowledge of the process of oil and gas treatment, installations and a thorough knowledge of the equipment used in oil and gas treatment installations.
• Knowledge in Primavera.
• Experience with offshore production units.
• Previous successful Experience in Full Field ShutDown Management of a FPSO
• Physical ability to work on offshore installations in the climatic conditions of the site
• English mandatory, French a plus.

We are primarily looking for a candidate who demonstrates the following skills:

• Ability to lead, advise and motivate multi-national teams
• Ability to manage all activities related to Construction and FFSD activities
• Ability to lead meetings and conduct supervisory activities
• Establish and maintain the construction standards within the project.
• Support the organization technical preparation (technical dossiers) and material preparation (logistics – infrastructures) for all the aspects of the Construction/ Shutdown, with the team and the designated correspondent of Exxon.
• Follow the performance of the FFSD works until completion, including issuing a close-out report.
• Coordinate with the various involved parties (production, inspection, maintenance, etc.) the definition of the Shut Down scope of work to cover.

Candidates Criteria:
Minimum level of experience required:

• 10 years or more.

Required Authorisations:

• Extensive Experience in complex offshore project Management.

Language:

• English (D-Full professional proficiency)
• French (C-Professional working proficiency)

What Can We Offer You?
Choosing SPIE means giving yourself the possibility:

• To evolve in a Group with an international dimension established on all continents,
• To experience a wide variety of professions within several activities:
  • Outdoor networks and public lighting
  • Information and communication systems
  • Nuclear
  • Maintenance
  • Oil and gas
  • Climatic engineering
  • Electrical engineering
  • Mechanical Engineering
• To work in energy and the environment, sectors of the future at the heart of sustainable development issues.

Application Closing Date
Not Specified.

Method of Application
Interested and qualified candidates should:
Click here to apply online

Job Title: HVAC / Electrical Supervisor – M/F

Reference: 2022-27183
Location: Port Harcourt, Rivers
Contractual Hours: Full time
Contract Type: Permanent Contract
Area Activity: Energy Transmission & Distribution

Missions
QHSE:

• Ensures HSE policy fulfillment during his activities.
• Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules.
• Is responsible to ensures compliance with HSE Legislation, Company Standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance, and responsible environment attitude.
• Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity.
• Contributes to achieve and improve HSE targets.
• Performs the updating of technical documentation.
• Gives his contribution in Hazard Analyses, incident investigations, Root Cause Failure Analyses, process incidents advising his hierarchy about HSE issues and proposing corrective solutions.

Main Activities

• Monitor equipment conditions using all indications available in the control room, on site, and portable test equipment.
• Diagnose equipment problems, report abnormal conditions to CSR, and prepare detailed work requests for plant defects.
• Organize and perform on site, the maintenance operations which are placed under his responsibility.
• Assist the preparation/planning team by giving any technical support for preparation of the jobs in his/her discipline.
• Manage intervention and prepare the technical reports related to the field.
• Responsible for the quantity and availability of specific tools of his team
• Take charge of the systems/equipment under his/her responsibility in case of breakdown until correct operation status.
• Identify recurrent corrective maintenance interventions, analyze them, and suggest improvements.
• Read, interpret, and implement technical information found in manufacturer’s and OEM technical manuals, electrical and mechanical P & IDs, and operating and maintenance procedures.
• Prepare, maintain, and administer procedures and reports related to the operation, monitoring and maintenance of the plant; maintain accurate logs of daily operation, check sheets, change charts and ink recorders.
• Identify any recurring problems related to the availability or quality of spare parts.

Operations:

• Provides I & E (instrumentation and electrical) support for assigned assets related to industrial processing plants of the oil and gas such as refining, natural gas, crude pipelines, compressor stations…
• Installs, inspects, troubleshoots, calibrates, and repairs wide variety of midstream instrumentation such as, but not limited to, transmitters, flow meters, sensors, analyzers, data loggers, programmable logic controller (PLCs), distributive control system (DCS).
• Installs, inspects, troubleshoots, maintains, and repairs electrical equipment such as, but not limited to, motor control centers, generators, transformers, switches, relays, wiring, electrical signal and communication systems, variable frequency drive (VFD), power distribution center (PDCs), uninterrupted power source (UPS).

Profile

• Bachelor’s Degree or HND in Electrical Engineering / Electrical & Electronics Engineering.
• Minimum of 5 years working experience in the Power Generation industry, with good experience in engineering designs and execution at construction phase.
• Good knowledge of applicable codes, standards and regulations for electrical and instrumentation engineering.
• Administrative skills including proficiency in typical office applications (Words, Excel, PowerPoint, etc).
• Fluent in English and ability to communicate well at all levels within the Company. In addition, the candidate must possess very good planning, presentation, organizational and interpersonal skills.
• Strong HSE awareness and commitment to site HSE policy is required.

Candidate Criteria:
Minimum level of experience required:

• 3 years or more.

Languages:

• English (D-Full professional proficiency)

What Can We Offer You?

• We offer a variety of stimulating and evolving experiences: exciting projects, learning from professionals and immersed in international culture.

Application Closing Date
Not Specified.

Method of Application
Interested and qualified candidates should:
Click here to apply online

Job Title: Rigging & Lifting Supervisor

Job ID: 2023-29329
Location: PHC, Missions Offshore – Rivers
Contract type: Fixed-term-contract
Contractual hours: Full time
Contract duration: 1 year

Missions

• Prepare FFSD lifting activities offshore according to HSE regulations.
• Preparing lifting plan.
• Preparing the permit to work and getting it approved by Site Lifting Specialist.
• Implements with Contractor Site Representative any Risk Assessment of Job Safety Analysis as required by Project HSE procedures.
• Create work procedures; assess contractors’ personnel and equipment for suitability for the work.
• Providing technical input on contractor and consultant selection with handling and lifting content.
• Verifies that the lifting equipment satisfies regulatory requirements: Condition / fitness for purpose, SWL and WLL, Serial No. Identification Number, Valid certificate, Colour code if applicable.

Requirements
To possess the following:

• Diploma holder & Certified OPITO Level 3 or 4
• Experience in Offshore construction, Site supervision, Installation, Pre-commissioning and Commissioning in an Oil and Gas Exploration and Production Industry preferably on an FPSO.
• Advanced rigging and lifting level 2 competences minimum
• Experience in oil and gas or related industry to have knowledge of the specific environment linked to HSE aspects
• Ability to work in a large multinational team
• Ability to work independently while maintaining good relations with colleagues and others
• Physical ability to work on offshore installations in the climatic conditions of the site
• Working language: English is mandatory, French is an advantage
• Perfectly competent and independent in his field, he must show common sense and organizational ability.

Candidate Criteria:

• Minimum level of experience required: 10 years or more
• Languages: English (D-Full professional proficiency)
• Required authorisations: OPITO Level 3 minimum in Rigging & Lifting

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Electrical and Instrumentation (E&I) Engineer M / F

Reference: 2023-29381
Location: Port Harcourt, Rivers
Contract type: Fixed-term-contract
Contractual hours: Full time
Contract duration: 24 Months

Job Responsibilities
Operations:

• Understanding and implementing designs from technical drawings
• Interacting with contractors and customers using verbal and written communication
• Making presentations to clients and coworkers
• Attending company meetings
• Creating product documentation and records
• Preparing cost estimates for customers and other employees
• Inspecting electrical components during and after the product installation

Profile

• Candidates should possess a Degree in Electrical Engineering; MSc is a plus
• Proven expertise as an electrical and instrumentation/telecom engineer
• Hands-on experience using design, calculation, drafting and modelling software
• Deep knowledge of electrical and instrumentation construction and installation processes and work package development
• Understanding of electrical engineering codes and safety standards
• Problem-solving abilities
• Attention to detail
• Strong organizational and communication skills

Candidate criteria:

• Minimum level of experience required: 3 years or more
• Languages: English (D-Full professional proficiency)

Required authorisations:

• Electrical habilitation
• Engineering registration (added advantage)

What can we offer you?

• We offer a variety of stimulating and evolving experiences: exciting projects, learning from professionals and immersed in international culture.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online

Job Title: Procurement Manager – M/F

Reference: 2023-29150
Location: Port Harcourt, Rivers
Contractual Hours: Full time
Contract Type: Permanent Contract
Area Activity: Technical Facilities Management

Responsibilities and Duties

• Raises Purchase Orders with Suppliers.
• Tracks Orders.
• Provides Client with up to date procurement information.
• Works closely with Warehouse Supervisor.
• Direct contact to suppliers.
• Filing of all records.
• Invoice payments.
• Freight deliveries and custom clearing agents.
• Liaise; follow up with forwarding agents to maximize schedule.
• Liaise; follow up with forwarding agents on the status of deliveries received as well as goods in transit. Ensure the Estimated Time Departure from somewhere and Estimated Time of Arrival to Douala for Sea Freight or to N’Djamena in the case of Air Freight.

Profile
Work Requirements:

• Minimum Level of Experience required: 6 years or more.
• Meet daily work requirements in a challenging environment.
• Provide support and communication to upper tire personnel.
• Participate in the development of personnel and work.
• Pass Company pre employment medical requirements: Including Drug & Alcohol Screening and malaria control program.
• Must be willing to work in challenging climatic conditions.
• Must work at all times in the best interest of Company.

Personal Qualities:

• Dedicated and reliable worker.
• Self motivated.
• Must be able to communicate in both written and verbal English.
• French speaking and understanding of written French an advantage.
• Safety Leadership qualities with interpersonal skills.
• Ability to work on own initiative with little supervision.
• Team Player.
• Sensitive to cultural differences.

Required Authorisations:

• Must have worked in a similar position for up to 5 years
• Microsoft Windows – Word, Excel.

Languages:

• English (C-Professional working proficiency).

What Can We Offer You?

• We offer a variety of stimulating and evolving experiences: exciting projects, learning from professionals and immersed in international culture.

Application Closing Date
Not Specified.

How to Apply
Interested and qualified candidates should:
Click here to apply online